Antennas for 2 & 2.5 Ghz ENG
The PMI-2732WGF Grid Antennas Lightweight & custom beamwidths, these antennas have a no rust, baked fiber-epoxy coating. All hardware is stainless steel. The antenna is an excellent choice for receive or transmit (50 watts) from 1990 to 2500 Mhz. Antennas may be stacked for higher gain.
These antennas are available in narrow & custom beamwidths for covering sectors up to 40 degrees. The antenna weighs 7 pounds, and has a windload of 1.2 square feet. Wind survival is 125 MPH. Physical dimensions are 27" x 32". The antenna can be rotated 90 degrees for horizontal polarization. Single lot price is $920.00 with quantity discounts available.
The PMI-2436WG Grid Antenna has an Irridite coat over steel. A bright gold epoxy paint is applied over the metal coating. The antenna has a 4" lower profile than the PMI-2732WGF. Single lot price is $850.00
Our Omni Antennas are ideal for areas where severe icing or high winds are a problem, or simply just for "fill". Since they do not require a rotor or switching, they provide the most reliability for local to medium range coverage. In the case of KPLC-TV, our 10 db gain Omni Antenna, used with our new SuperFilter/LNA that rejects PCS, provided signals as clean and at the same level as their MACOM DA624 Directional Antenna System. Our 10 db gain OMNI antenna is priced at $3,150.00 each, and come with Heavy-Duty Galvanized hardware.
WLOX-TV and WOFL-TV, also uses our Omni system. The system is in series with their Ultrascan antennas. When voltage is applied through the Heliax line by our DC inserter, the Omni Antenna and it's separate amplifier box is switched in. If the main antenna fails, it can be completely removed for service, while the Omni acts as a backup. With this arrangement, the Omni can be used to quickly set up an ENG shot, and then the main antenna can be switched in if more gain is needed. There are no additional power lines running up the tower. The cost of this OMNI Antenna System with our PCS-Proof SuperFilter/LNA is typically $9,300.00, and is guaranteed for 2 years.
The PMI-CP2 Series is a complete antenna system that uses a special cross-polarized grid backplane, and comes complete with LNA. It is capable of Circular (Right or Left), Vertical, or Horizontal polarization. The gain of the antenna alone is 22 db. The LNA is available in gains from 10 to 45 db, and a typical IP3 of +36dbm! This is the ultimate ENG System for 2 & 2.5 Ghz. It is totally PCS Proof, and can be placed near high-power transmitting antennas. Call or Email for more info and pricing on this system.
Antenna Specs:
| Model Number | Frequency Range |
Gain dbi |
Lobe -3db |
Coating | Size | Wt | Price |
| PMI-2732WGF | both 2 & 2.5 | 23.1 | 13.2° | Epoxy | 27x32" | 7# | $920 |
| PMI-2732WGF/25 | both 2 & 2.5 | 19.5 | 25° | Epoxy | 27x32" | 7# | $990 |
| PMI-2732WGF/40 | both 2 & 2.5 | 16.7 | 40° | Epoxy | 27x32" | 7# | $990 |
| PMI-2436WG | both 2 & 2.5 | 22.4 | 13.8° | Iridite | 24x36" | 7# | $850 |
| PMI-omni10-2 | 2 or 2.5 GHz | 10 | 360° | Fiberglass | 52"x3" | 10# | $3150 |
| PMI-omni12-2 | 2 or 2.5 GHz | 12 | 360° | Fiberglass | 77"x3" | 17# | $4190 |
| SuperFilterLNA | 2,2.5,7,13,23 | 5-50 | - | - | 14x12x6 | 33# | call |
Call for details and LNA (amplifier) pricing for your site:
1-888-828-8775 or EMAIL:
.